# Collision detection¶

Collision detection is needed in most games to detect and act upon two components intersecting each other. For example an arrow hitting an enemy or the player picking up a coin.

In most collision detection systems you use something called hitboxes to create more precise bounding boxes of your components. In Flame the hitboxes are areas of the component that can react to collisions (and make gesture input) more accurate.

The collision detection system supports three different types of shapes that you can build hitboxes from, these shapes are Polygon, Rectangle and Circle. Multiple hitbox can be added to a component to form the area which can be used to either detect collisions or whether it contains a point or not, the latter is very useful for accurate gesture detection. The collision detection does not handle what should happen when two hitboxes collide, so it is up to the user to implement what will happen when for example two PositionComponents have intersecting hitboxes.

Do note that the built-in collision detection system does not take collisions between two hitboxes that overshoot each other into account, this could happen when they either move very fast or update being called with a large delta time (for example if your app is not in the foreground). This behaviour is called tunneling, if you want to read more about it.

Also note that the collision detection system has a limitation that makes it not work properly if you have certain types of combinations of flips and scales of the ancestors of the hitboxes.

## Mixins¶

### HasCollisionDetection¶

If you want to use collision detection in your game you have to add the HasCollisionDetection mixin to your game so that it can keep track of the components that can collide.

Example:

class MyGame extends FlameGame with HasCollisionDetection {
// ...
}


Now when you add ShapeHitboxs to components that are then added to the game, they will automatically be checked for collisions.

### CollisionCallbacks¶

To react to a collision you should add the CollisionCallbacks mixin to your component. Example:

class MyCollidable extends PositionComponent with CollisionCallbacks {
@override
void onCollision(Set<Vector2> points, PositionComponent other) {
if (other is ScreenHitbox) {
//...
} else if (other is YourOtherComponent) {
//...
}
}

@override
void onCollisionEnd(PositionComponent other) {
if (other is ScreenHitbox) {
//...
} else if (other is YourOtherComponent) {
//...
}
}
}


In this example we use Dart’s is keyword to check what kind of component we collided with. The set of points is where the edges of the hitboxes intersect.

Note that the onCollision method will be called on both PositionComponents if they have both implemented the onCollision method, and also on both hitboxes. The same goes for the onCollisionStart and onCollisionEnd methods, which are called when two components and hitboxes starts or stops colliding with each other.

When a PositionComponent (and hitbox) starts to collide with another PositionComponent both onCollisionStart and onCollision are called, so if you don’t need to do something specific when a collision starts you only need to override onCollision, and vice versa.

If you want to check collisions with the screen edges, as we do in the example above, you can use the predefined ScreenHitbox class.

## ShapeHitbox¶

The ShapeHitboxs are normal components, so you add them to the component that you want to add hitboxes to just like any other component:

class MyComponent extends PositionComponent {
}
}


If you don’t add any arguments to the hitbox, like above, the hitbox will try to fill its parent as much as possible. Except for having the hitboxes trying to fill their parents, there are two ways to initiate hitboxes and it is with the normal constructor where you define the hitbox by itself, with a size and a position etc. The other way is to use the relative constructor which defines the hitbox in relation to the size of its intended parent.

You can read more about how the different shapes are defined in the ShapeComponents section.

Remember that you can add as many ShapeHitboxs as you want to your PositionComponent to make up more complex areas. For example a snowman with a hat could be represented by three CircleHitboxs and two RectangleHitboxs as its hat.

A hitbox can be used either for collision detection or for making gesture detection more accurate on top of components, see more regarding the latter in the section about the GestureHitboxes mixin.

### CollisionType¶

The hitboxes have a field called collisionType which defines when a hitbox should collide with another. Usually you want to set as many hitboxes as possible to CollisionType.passive to make the collision detection more performant. By default the CollisionType is active.

The CollisionType enum contains the following values:

• active collides with other Collidables of type active or passive

• passive collides with other Collidables of type active

• inactive will not collide with any other Collidables

So if you have hitboxes that you don’t need to check collisions against each other you can mark them as passive by setting collisionType = CollisionType.passive, this could for example be ground components or maybe your enemies don’t need to check collisions between each other, then they could be marked as passive too.

Imagine a game where there are a lot of bullets, that can’t collide with each other, flying towards the player, then the player would be set to CollisionType.active and the bullets would be set to CollisionType.passive.

Then we have the inactive type which simply doesn’t get checked at all in the collision detection. This could be used for example if you have components outside of the screen that you don’t care about at the moment but that might later come back in to view so they are not completely removed from the game.

These are just examples of how you could use these types, there will be a lot more use cases for them so don’t doubt to use them even if your use case isn’t listed here.

### PolygonHitbox¶

It should be noted that if you want to use collision detection or containsPoint on the Polygon, the polygon needs to be convex. So always use convex polygons or you will most likely run into problems if you don’t really know what you are doing. It should also be noted that you should always define the vertices in your polygon in a counter-clockwise order.

The other hitbox shapes don’t have any mandatory constructor, that is because they can have a default calculated from the size of the collidable that they are attached to, but since a polygon can be made in an infinite number of ways inside of a bounding box you have to add the definition in the constructor for this shape.

The PolygonHitbox has the same constructors as the PolygonComponent, see that section for documentation regarding those.

### RectangleHitbox¶

The RectangleHitbox has the same constructors as the RectangleComponent, see that section for documentation regarding those.

### CircleHitbox¶

The CircleHitbox has the same constructors as the CircleComponent, see that section for documentation regarding those.

## ScreenHitbox¶

ScreenHitbox is a component which represents the edges of your viewport/screen. If you add a ScreenHitbox to your game your other components with hitboxes will be notified when they collide with the edges. It doesn’t take any arguments, it only depends on the size of the game that it is added to. To add it you can just do add(ScreenHitbox()) in your game, if you don’t want the ScreenHitbox itself to be notified when something collides with it. Since ScreenHitbox has the CollisionCallbacks mixin you can add your own onCollisionCallback, onStartCollisionCallback and onEndCollisionCallback functions to that object if needed.

## CompositeHitbox¶

In the CompositeHitbox you can add multiple hitboxes so that they emulate being one joined hitbox.

If you want to form a hat for example you might want to use two RectangleHitboxs to follow that hat’s edges properly, then you can add those hitboxes to an instance of this class and react to collisions to the whole hat, instead of for just each hitbox separately.

Usually you don’t have to worry about the broad phase system that is used, so if the standard implementation is performant enough for you, you probably don’t have to read this section.

A broad phase is the first step of collision detection where potential collisions are calculated. To calculate these potential collisions are a lot cheaper to calculate than to check the exact intersections from the directly and it removes the need to check all hitboxes against each other and therefore avoiding O(n²). The broad phase produces a set of potential collisions (a set of CollisionProspects), this set is then used to check the exact intersections between hitboxes, this is sometimes called narrow phase.

By default Flame’s collision detection is using a sweep and prune broadphase step, if your game requires another type of broadphase you can write your own broadphase by extending Broadphase and manually setting the collision detection system that should be used.

For example if you have implemented a broadphase built on a quad tree instead of the standard sweep and prune, then you would do the following:

class MyGame extends FlameGame with HasCollisionDetection {
MyGame() : super() {
collisionDetection =
}
}


## Ray casting and Ray tracing¶

Ray casting and ray tracing are methods for sending out rays from a point in your game and being able to see what these rays collide with and how they reflect after hitting something.

### Ray casting¶

Ray casting is the operation of casting out one or more rays from a point and see if they hit anything, in Flame’s case, hitboxes.

We provide two methods for doing so, raycast and raycastAll. The first one just casts out a single ray and gets back a result with information about what and where the ray hit, and some extra information like the distance, the normal and the reflection ray. The second one, raycastAll, works similarly but sends out multiple rays uniformly around the origin, or within an angle centered at the origin.

To use the ray casting functionality you have to have the HasCollisionDetection mixin on your game. After you have added that you can call collisionDetection.raycast(...) on your game class.

Example:

class MyGame extends FlameGame with HasCollisionDetection {
@override
void update(double dt) {
super.update(dt);
final ray = Ray2(
origin: Vector2(0, 100),
direction: Vector2(1, 0),
);
final result = collisionDetection.raycast(ray);
}
}


In this example one can see that the Ray2 class is being used, this class defines a ray from an origin position and a direction (which are both defined by Vector2s). This particular ray starts from 0, 100 and shoots a ray straight to the right.

The result from this operation will either be null if the ray didn’t hit anything, or a RaycastResult which contains:

• Which hitbox the ray hit

• The intersection point of the collision

• The reflection ray, i.e. how the ray would reflect on the hitbox that it hix

• The normal of the collision, i.e. a vector perpendicular to the face of the hitbox that it hits

If you are concerned about performance you can pre create a RaycastResult object that you send in to the method with the out argument, this will make it possible for the method to reuse this object instead of creating a new one for each iteration. This can be good if you do a lot of ray casting in your update methods.

#### raycastAll¶

Sometimes you want to send out rays in all, or a limited range, of directions from an origin. This can have a lot of applications, for example you could calculate the field of view of a player or enemy, or it can also be used to create light sources.

Example:

class MyGame extends FlameGame with HasCollisionDetection {
@override
void update(double dt) {
super.update(dt);
final origin = Vector2(200, 200);
final result = collisionDetection.raycastAll(
origin,
numberOfRays: 100,
);
}
}


In this example we would send out 100 rays from (200, 200) uniformingly spread in all directions.

If you want to limit the directions you can use the startAngle and the sweepAngle arguments. Where the startAngle (counting from straight up) is where the rays will start and then the rays will end at startAngle + sweepAngle.

If you are concerned about performance you can re-use the RaycastResult objects that are created by the function by sending them in as a list with the out argument.

### Ray tracing¶

Ray tracing is similar to ray casting, but instead of just checking what the ray hits you can continue to trace the ray and see what its reflection ray (the ray bouncing off the hitbox) will hit and then what that casted reflection ray’s reflection ray will hit and so on, until you decide that you have traced the ray for long enough. If you imagine how a pool ball would bounce on a pool table for example, that information could be retrieved with the help of ray tracing.

Example:

class MyGame extends FlameGame with HasCollisionDetection {
@override
void update(double dt) {
super.update(dt);
final ray = Ray2(
origin: Vector2(0, 100),
direction: Vector2(1, 1)..normalize()
);
final results = collisionDetection.raytrace(
ray,
maxDepth: 100,
);
for (final result in results) {
if (result.intersectionPoint.distanceTo(ray.origin) > 300) {
break;
}
}
}
}


In the example above we send out a ray from (0, 100) diagonally down to the right and we say that we want it the bounce on at most 100 hitboxes, it doesn’t necessarily have to get 100 results since at some point one of the reflection rays might not hit a hitbox and then the method is done.

The method is lazy, which means that it will only do the calculations that you ask for, so you have to loop through the iterable that it returns to get the results, or do toList() to directly calculate all the results.

In the for-loop it can be seen how this can be used, in that loop we check whether the current reflection rays intersection point (where the previous ray hit the hitbox) is further away than 300 pixels from the origin of the starting ray, and if it is we don’t care about the rest of the results (and then they don’t have to be calculated either).

If you are concerned about performance you can re-use the RaycastResult objects that are created by the function by sending them in as a list with the out argument.

## Comparison to Forge2D¶

If you want to have a full-blown physics engine in your game we recommend that you use Forge2D by adding flame_forge2d as a dependency. But if you have a simpler use-case and just want to check for collisions of components and improve the accuracy of gestures, Flame’s built-in collision detection will serve you very well.

If you have the following needs you should at least consider to use Forge2D:

• Interacting realistic forces

• Particle systems that can interact with other bodies

• Joints between bodies

It is a good idea to just use the Flame collision detection system if you on the other hand only need some of the following things (since it is simpler to not involve Forge2D):

• The ability to act on some of your components colliding

• The ability to act on your components colliding with the screen boundaries

• Complex shapes to act as a hitbox for your component so that gestures will be more accurate

• Hitboxes that can tell what part of a component that collided with something

## Migration from the collision detection system in v1.0¶

The collision detection system introduced in v1.1 is easier to use, and much more efficient than the one that was in v1.0, but while making these improvements some breaking changes had to be made.

There is no longer a Collidable mixin, instead your game automatically knows when a hitbox has been added to one of your components when the HasCollisionDetection mixin is added to your game.

To receive the callbacks from collisions that your component is involved in you should add the CollisionCallbacks mixin to your component, and then override the same methods as you did previously.

Since the hitboxes now are Components you add them to your component with add instead of addHitbox which was used previously.

### Name changes¶

• ScreenCollidable -> ScreenHitbox

• HitboxCircle -> CircleHitbox

• HitboxRectangle -> RectangleHitbox

• HitboxPolygon -> PolygonHitbox

• Collidable -> CollisionCallbacks (Only needed when you want to receive the callbacks)

• HasHitboxes -> GestureHitboxes (Only when you need hitboxes for gestures)

• CollidableType -> CollisionType